Kyocera FS-920 - Page 78

2GL/2FV/2FW
1-6-12
4. Pull the heat R bush and heat L bush (with
heat roller) from the upper fuser guide.
5. Remove the heat R bush, heat L bush and
heat gear from the heat roller.
Figure 1-6-17
6. Remove the one screw and then remove the
fuser thermistor.
Figure 1-6-18
Heat roller
Upper fuser guide
Heat roller
Heat roller
Heat L bush
Heat L bush
Heat R bush
Heat R bush
Heat gear
Fuser thermisto
r
Screw