Kyocera FS-920 - Page 88

2GL/2FV/2FW
1-6-22
(2) Detaching and refitting the eraser lamp (PWB)
<Procedure>
1. Remove the laser scanner unit. See page 1-
6-20.
2. Remove the one connector.
3. Remove the wire from two clamps.
Figure 1-6-29
4. Remove the wire form clamp.
5. Remove the sheet eraser.
6. Remove the eraser lamp (PWB).
Figure 1-6-30
Connector
Wire
Clamps
Eraser lamp (PWB)
Sheet eraser
Clamp
Wire