Kyocera FS-C2626MFP - Page 140

7-3
Using a Connected Telephone > FAX/TEL Auto Switch Reception
1
The telephone rings.
The connected telephone set makes a ringing tone. Note that if [0] (zero) is set as the number
of rings (for FAX/TEL Auto Switch), the connected telephone does not ring.
2
Answer the call.
When the call is from a telephone
1 The machine makes a ringing tone urging the user to respond. Lift the handset of the
telephone within 30 seconds.
2 Talk to the other party.
When the call is from a fax
The machine starts receiving fax originals.
NOTE
You can change the number of times the ringing tone rings. (Refer to Reception on page 9-7.)
NOTE
If you do not lift the handset within 30 seconds, the machine switches to fax reception.
NOTE
At the end of the conversation, you can manually receive the originals. (Refer to Manual
Reception on page 7-9
.)