Kyocera FS-C2626MFP

5-7
Receiving Faxes > Manual Reception
Manual Reception
This method allows you to receive faxes by pressing [Manual RX] after confirming that the telephone line has connected
to the sending system.
Flow of reception
1
The machine receives a call.
When the machine receives a call, it rings.
2
Press [On Hook].
Press [On Hook] to establish the connection.
3
Press [Manual RX].
After the sending side has started transmission, the machine starts receiving the
originals.
NOTE
To use Manual Reception, you need to change the receiving mode to Manual Reception. To
change to manual mode, refer to Reception Mode on page 9-8.
Connecting a telephone set (commercially available product) to this machine enables you to
receive originals after talking to the person at the sending system.
FAX
On Hook Chain
Check
Address Book
Add Dest.
Direct
Ext Address Book
Functions
10:10
Dest. :
One Touch Key
Recall
Favorites
Ready to send.
GB0669_00
On Hook
10:10Ready to send.
0123456
Manual RX Line Off
GB0694_00