Kyocera FS-C2626MFP

1-6
Before Using the Fax Machine > Part Names and Functions
Touch Panel
Enter key and Quick No. Search key
This section explains how to use the Enter key and Quick No. Search key on the operation panel.
Using the Enter key
The Enter key works in the same way as keys displayed on the touch panel, such as [OK] and
[Close].
The Enter symbol ( ) is displayed next to the keys whose operations are carried out by the
Enter key (e.g. [OK ], [Close ]).
Pressing the Enter key on the operation panel has the same effect as touching [OK] on the
touch panel.
Using the Quick No. Search key
The Quick No. Search key is used to specify a transmission destination by speed dial, or by
directly entering the fax number with the numeric keys.
Functions
Original Size
Close
10:10
Original Orientation
1-sided
Duplex
1/3
Add/Edit
Shortcut
Ready to send.
FAX TX Resolution
200x100dpi Normal
A4
Top Edge on Left
FAX
On Hook Chain
Check
Address Book
Add Dest.
Direct
Ext Address Book
Functions
10:10
Dest. :
One Touch Key
Recall
FavoritesShortcut 1 Shortcut 2
Ready to send.
Displays the status of the
equipment as well as necessary
operation messages.
Enters destinations.
Configures function settings.
Displays the date and time and
number of destinations.
Displays shortcuts.
Displays the status of the
equipment as well as necessary
operation messages.
Displays available functions and
settings.
Scrolls up and down when the list of
values cannot be displayed in its
entirety on a single screen.
Registers functions as shortcuts.
GB0669_03GB0673_00
Density
10:10
Lighter
Cancel
Normal
-3
Darker
-2 -1 0
OK
Ready to send.
+1 +2 +3
GB0008_01