4-19
Sending Faxes > Standby Transmission
Standby Transmission
During a communication, you can scan originals and schedule a next transmission. When the first communication is
completed, the machine automatically starts the scheduled next transmission. When using standby transmission, you do
not need to wait when a communication has prolonged due to broadcast transmission.
1
Press the FAX key.
2
Place the originals.
3
Select the destination, and set transmitting functions if you want to use
any.
4
Press the Start key.
Scanning of the originals starts, and the next transmission is scheduled.
5
When the communication is completed, the scheduled transmission will
begin.
Together with delayed transmission and interrupt send, up to 35 transmissions can be
scheduled.
You can use other functions such as broadcast transmission.
When On is selected in Dest. Check before Send, a destination confirmation screen is
displayed when you press the Start key. For details, refer to Confirmation Screen of
Destinations on page 8-12.
To Next Page
Loading...
