8-4
Checking Transmission Results and Registration Status > Printing Administrative Reports
Printing Administrative Reports
You can print various administrative reports to check the results of fax transmission or the status of the functional setup.
Send Result Reports
Each time you send a fax, you can print a report to confirm whether the fax was sent successfully. You can also print the
transmitted image in the send result report.
1
Display the screen.
2
Configure the function.
Press [Off] (not to print), [On] (to print), or [Error Only].
If you selected [On] or [Error Only], specify whether the transmitted image is to be attached by
selecting [Off] (do not print transmitted image), [Partial Image] (print part of the transmitted
image at full size), or [Full Image] (print the entire transmitted image at reduced size).
Send Result Report
10:10System Menu/Counter.
RX Result Report
< Back
1/1
Attach Image
Job Finish Notice Setting
Report - Result Report Setting
To Next Page
Loading...
