Finishing
User Guide 5-8
1
From the application’s Print dialog box, open Properties. (Select Print from the File
menu, and select Properties.) 1
2
In the Basic tab, under Destination, select a face-down finishing tray, such as
Finishing tray or Finishing tray (face-down). 2
3
Click the Finishing tab, then select Separation. The Offset jobs option is selected. 3
4
Click OK to return to the Print dialog box. 4
5
Click OK to start printing. 5
Your print job is stacked in the output tray, offset from other jobs in the same tray.
To Next Page
Loading...
