If you use csh, use "\!".
5. Start the print scheduler.
#/usr/bin/sh /etc/init.d/lp start
6. Enable the print queue.
#/usr/sbin/accept sales820q
#/usr/bin/enable sales820q
Printing, Canceling a Print Job, and Checking Queue Status
The commands for these functions are explained in the Printing, Canceling a Job, and Checking Status
section.
HP-UX 9.x and 10.x Setup
The instructions below are for HP-UX 9.03. The commands and paths listed in the following procedures may vary slightly
depending upon the OS version.
Setting up the Remote Spooler
1. Login as root.
# login root
2. Disable the print spooler.
#/usr/lib/lpshut
3. Add the following line to the
/etc/inetd.conf
file.
printer stream tcp nowait root /usr/lib/rlpdaemon -i
4. Restart
inetd
.
#/etc/inetd -c
Configuring the Print Queue
1. Create the print queue.
The following example uses
sales820ptr
as the print server name and
sales820q
as the print queue name:
#/usr/lib/lpadmin -psales820q -mrmodel -ormsales820ptr -orplp1 -ocmrcmodel -osmrsmodel -ob3 -v/dev/null
2. Enable the print queue.
#/usr/lib/accept sales820q
#/usr/bin/enable sales820q
3. Start the print scheduler.
#/usr/lib/lpsched
3/8 ページUnix Printing
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\unix.htm
To Next Page
Loading...
