5-4. Protocols > NetWare > General
This print system supports both NDS and bindery printing in either printer server mode or remote printer mode.
To set up NetWare, client software must be installed and you must be logged on with administrator rights. Consult your
network administrator for assistance.
Printing with NetWare is supported with Novell or Microsoft NetWare Client as the client.
Network operations such as creating the queue require admin, supervisor, or equivalent rights.
5-5. Protocols > NetWare > Bindery Services
You can register the file server in print server mode and the print server in remote printer mode that are connected by the
print system. If none are registered, network discovery is performed at startup, and the first servers (up to eight) are
automatically connected.
fter system startup, the system conducts polling at regular intervals to connect to servers automatically even when
registered file servers are running.
physical port number for TCP (such as 9100). Data sent to the designated physical
port is converted in a way corresponding to the designated logical printer. If you
designate the same port number as a port that was previously designated (such as
for FTP or LPD), the port designation is invalid.
Bi-directional Printing You can enable (On) or disable (OFF) bi-directional printing that uses the physical
port for TCP/IP communication. If this setting is off, all data received from the
printer is disregarded. When printing with PostScript, PJL, or other commands, bi-
directional printing must be on to return data to the client that was received from the
printer.
Start of Job String You can designate a string to be sent to the printer before direct output to the
output port (lp port). If you need to send a control code before printing, designate
that string.
End of Job String You can designate a string to be sent to the printer after direct output to the output
port (lp port). If you need to send a control code after printing, designate that string.
Banner Page Banner page printing can be enabled (On) or disabled (Off) when printing via FTP
or LPD.
Item
Description
NetWare Protocol Choose whether NetWare protocol is enabled (On) or disabled (Off).
Bindery Mode Choose whether bindery mode is enabled (On) or disabled (Off).
Frame Type Choose from four supported four frame types: 802.2, SNAP, ETHERNET-II, and
802.3. You can also choose auto-detect.
NDS Tree Designate the name of the NDS tree for the connection.
NDS Context Designate the NDS context for connections in print server mode.
Print Server Mode Choose whether print server mode is enabled (On) or disabled (Off).
Print Server Name Shows the print server name.
Queue Polling Interval The polling interval can be designated.
Banner Page Requests Choose whether to print banner page when printing in print server mode.
Password
password can be designated as desired. Login requires that the password here
match the print server password set by the NetWare utility.
Remote Printer Mode Choose whether remote printer mode is enabled (On) or disabled (Off).
Printer Name Shows the print server name.
Job Timeout Set the timeout value to complete jobs in remote printer mode in a range of 4 to 255
seconds.
12/19 ページUsing a Web Browser to Manage the IB-23
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
To Next Page
Loading...
