5-6. Protocols > AppleTalk
This print system supports Mac OS. (See 1-1. Compatible Systems) and is compatible with LaserWriter driver version 8.x.
To print in AppleTalk networks, activate AppleTalk protocol.
5-7. Protocols > NetBEUI/NetBIOS
Print systems connected via NetBEUI are registered in Windows in My Network.
5-8. Management/E-mail > SMTP > General
The IB-23 can notify registered users by e-mail when the toner is running out, or send other information. SMTP is used for
this feature. You must configure the SMTP protocol settings before the IB-23 can connect to an SMTP server.
Item
Description
Print Server Mode Up to eight file servers can be registered. If there are nine or more file servers,
register the priority file server names.If none are registered, up to eight servers are
automatically connected at startup. However, print server names in the file server
must match IB-23 print server names.
Remote Printer Mode Up to eight print servers can be registered. If there are nine or more print servers,
register the priority print server names. If none are registered, up to eight servers
are automatically connected at startup. However, printer names (printer port
names) in the print server must match IB-23 remote printer names (printer port
names). Even if registered file servers are started after the IB-23, the IB-23
regularly conducts polling so they will be automatically connected.
Item
Description
ppleTalk Choose whether AppleTalk protocol is enabled (On) or disabled (Off).
Printer Name Identifies printers in the AppleTalk network.
Zone Name Identifies the AppleTalk zone (network). An asterisk (*) here indicates the default
zone.
Item
Description
NetBEUI Protocol Choose whether NetBEUI protocol is enabled (On) or disabled (Off).
NetBIOS over TCP/IP Enables (
On
) or disables (
Off
) NetBIOS over TCP/IP. When this setting is on,
NetBIOS can be used in a TCP/IP network environment.
Browse Master When this option is selected, the print system changes to browse master, and a
workgroup is created in My Network. When the option is not selected, the print
system is added to an existing workgroup.
Printer Name The printer and host names on the TCP/IP General tab (Protocols > TCP/IP >
General) are interrelated. If you want to change the NetBEUI printer name, change
the TCP/IP host name as well.
Workgroup The printing workgroup is a workgroup shown in Entire Network in My Network. The
default workgroup name is "KM-NetPrinters."
Comment You can enter a comment as desired. This field can also be left blank.
Item
Description
SMTP Protocol Choose whether SMTP protocol is used (
On
) or not (
Off
).
SMTP Port Number For designating the SMTP port number. Use port number
25
. Click the
Test
button
to check the connection.
SMTP Server Name Enter the SMTP server name or IP address.
uthentication Protocol Choose whether SNMTP authentication protocol is used (
On
) or not (
Off
).
uthenticate as Select one of the POP3 users (1-3) for SMTP authentication using the selected
13/19 ページUsing a Web Browser to Manage the IB-23
2006/05/26file://F:\USERMAN\EXPORT\Option\IB-23\P6以降用完了分\ｈｔｍｌ\English\card_homepag...
To Next Page
Loading...
