Using the Operation Panel 4-13
Status Page (Printing a printer's status page)
You can check the printer's current status and option settings by printing
a status page.
1 In the Report Print menu, press U or V to select Status Page.
2 Press [OK]. A confirmation message is displayed.
3 Press [Yes] ([Left Select]). The message Accepted. appears and
the printer prints the status page.
Pressing [No] ([Right Select]) returns you to the Report Print menu
without printing the status page.
Understanding the Status Page
The numbers in the following diagram refer the items explained below the
diagram. The items and values on the status page may vary depending
on the printer’s firmware version.
To Next Page
Loading...
