Kyocera KM-3060 - Logging in When User Accounting Has Been Enabled

FAX Operation (Advanced)
OPERATION GUIDE 4-65
4
Communication modes subject to job accounting
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Encrypted transmission
• Manual send when dialed from this machine to the receiving system
• Polling transmission
• Network FAX transmission
Restriction of use function
When you have enabled job accounting, you need to enter an Account ID
when performing the following operations.
• Normal transmission
• Delayed transmission
• Broadcast transmission
• Sub address transmission
• Output from FAX Box
• Encrypted transmission
• Cancelling of sending jobs
• Manual send when dialed from this machine to the receiving system
• Polling transmission
• Network FAX transmission
IMPORTANT: You can use ‘Make a call’, ‘Checking FAX Job History’ and
‘Communication Control Report Output’ functions without entering an
Account ID or Administrator No.
When job accounting has been enabled, batch transmission function
works only for communication to be performed for the same Account ID.
The communication to be performed with a different Account ID is not
conducted as a batch transmission.
Normally, the Local FAX Name is printed in the transmit terminal
identification (TTI). However, when job accounting has been enabled, and
you send originals after entering an Account ID, the Account Name is
printed.
Logging in when User Accounting has been Enabled
When user accounting has been enabled, you need to enter a User ID and
Password to use the machine.