To Next PageTo Next PageWhat to do if my Kyocera KM-4530 says 'Add paper in drawer. XX size (XXX)'?
If your Kyocera Printer displays the message 'Add paper in drawer. XX size (XXX)', it means that the size or type of paper selected for printing does not match the size or type of paper in the drawer. To solve this, replace the paper in the drawer with the correct size and type.
What to do if my Kyocera Printer displays 'Place paper in drawer. PLACE PAPER IN PAPER DRAWER'?
If your Kyocera Printer shows 'Place paper in drawer. PLACE PAPER IN PAPER DRAWER', this indicates that the drawer has run out of paper. Simply add more paper to the drawer.
Why does my Kyocera Printer say 'Department code mismatch'?
If your Kyocera Printer displays 'Department code mismatch', it means the department code you entered does not match the registered one. To fix this, check the department code that is registered in the printer driver.
What to do if my Kyocera KM-4530 Printer displays 'Exceeded print quantity limit. Exceeded pre-registered printing quantity'?
If your Kyocera Printer shows 'Exceeded print quantity limit. Exceeded pre-registered printing quantity', it means the amount of printing has exceeded the acceptable capacity set under copy management. To resolve this, change the copy management setting in the printer.
What to do if my Kyocera Printer displays 'Check the waste punch box'?
If your Kyocera Printer shows 'Check the waste punch box', it means that either the waste punch box is not correctly installed, or it is full. Reposition or empty it as necessary.
What does 'Warning low memory' mean on my Kyocera Printer?
If your Kyocera Printer displays 'Warning low memory', it indicates that there is not enough memory. You should delete any unnecessary font data and macros.
What does 'Virtual mailbox full' mean on my Kyocera KM-4530 Printer?
If your Kyocera Printer displays 'Virtual mailbox full', it means there is not enough area in the virtual mailbox. To solve this, print out data in the virtual mailbox.
What does 'Print overrun Press GO' mean on my Kyocera KM-4530?
If your Kyocera Printer displays 'Print overrun Press GO', a data overrun error has occurred due to insufficient memory. Press the Printer key to switch to the printer mode.
What does 'Memory overflow Press GO' mean on my Kyocera Printer?
If your Kyocera Printer displays 'Memory overflow Press GO', it means the current print job could not be completed due to insufficient memory in the printer. Reduce the size of the RAM disk to resolve this.
What does 'Option interface error' mean on my Kyocera Printer?
If your Kyocera Printer displays 'Option interface error', it means the optional interface board is loaded in the wrong slot. Turn the power off and load the board in the correct slot.
General| Type | Multifunction Printer |
|---|---|
| Technology | Laser |
| Print Speed | 45 ppm |
| Print Resolution | 1200 x 1200 dpi |
| Copy Speed | 45 cpm |
| Copy Resolution | 600 x 600 dpi |
| Scan Resolution | 600 x 600 dpi |
| Monthly Duty Cycle | 150, 000 pages |
| Duplex Printing | Yes |
| USB Port | Yes |
| Max Paper Size | 11 x 17 inches |
| Network Connectivity | Ethernet |
Configures settings for parallel, serial, and network interfaces for printer communication.
Sets emulation protocols like PCL6, Line Printer, IBM Proprinter, and KC-GL for different interfaces.
Adjusts page-related settings such as number of copies, orientation, reduction, and page protection.
Configures printing quality parameters like smoothing mode, EcoPrint, and printing resolution.
Provides a step-by-step guide for installing the printer driver on a Windows computer.
Details how to perform printing tasks from applications, including setting up printer properties.
Guides users on how to access and adjust printer driver properties for optimal performance.
Explains how to use the e-MPS function for job storing, virtual mailboxes, and barcode printing.
Provides instructions for installing PPD files and configuring the printer on a Macintosh computer.
