Kyocera KM-4530 - Auto Continue ON;OFF and Recovery Time; Service Maintenance Menu; Service Representative Status Page Print out

4-47
4. Selecting the Printer Settings
4
1
2
3
1
2
3 Auto Continue ON/OFF and Recovery Time
Use the “▲” and “▼” cursor keys to select “Auto continue” and then
touch the “Change” key.
Touch the “ON” key.
• If you select “OFF” here, the auto continue recovery time setting
will not be available.
Use the “+” and/or “–” key to select the desired recovery time.
Once you have completed the setting, touch the “Close” key. The
display will return to the [Others] screen.
• To cancel the setting, touch the “Back” key.
4 Service Maintenance menu
Touch the “Service” key.
Service Representative Status Page print out
Touch the “Print Status Page” key. A Service Representative Status
Page will be printed out.