Kyocera KM-4530 - Reading Program Data; Reading Macro Data

4-40
4. Selecting the Printer Settings
1
2
3
1
2
6 Reading program data
Touch the “Program” key under the “Read” setting.
Use the “▲” and “▼” cursor keys to select the program data that you
want to be read.
• If you want to return to the [Memory Card] screen, touch the
“Cancel” key.
Touch the “Enter” key. The display will return to the basic printer
screen and the program data will be read.
•“Processing” will be displayed in the basic printer screen while the
program data is being read.
7 Reading macro data
Touch the “Macro” key under the “Read” setting.
Touch the “Ye s ” key. The display will return to the basic printer
screen and the macro data will be read.
•“Processing” will be displayed in the basic printer screen while the
macro data is being read.
• If you select “No” here, the macro data will not be read and the
display will return to the [Memory Card] screen.