Kyocera KM-4530 - Deleting Program Data; Deleting Macro Data

4-26
4. Selecting the Printer Settings
Item
9 Deleting program data
Deletes the selected program data from the RAM disk.
0 Deleting macro data
Deletes the selected macro data from the RAM disk.
Available settings
Select from among the program
partition names that are
displayed.
Select among the macro partition
names that are displayed.
Remarks
• Displayed only when there is
appropriate program data in the
RAM disk.
• Displayed only when “ON” is
selected under the “RAM disk ON/
OFF” setting.
• Displayed only when there is
appropriate macro data in the RAM
disk.
• Displayed only when “ON” is
selected under the “RAM disk ON/
OFF” setting.