2-14
2. Windows KX Driver
1
2
3
■ How to perform barcode printing
* The optional Barcode Reader must be installed in order to perform barcode printing.
Click in the [Job Storage (e-MPS)] checkbox in the [Job Settings] dialog box and
select [Temporary] or [Permanent]. If you select [Permanent], the [Options...] button
will appear. Click on this button when you want to access the [Job Storage Options]
dialog box.
Select [Application Defined] or [Custom] under [Job Name]. If you selected
[Custom], input a user name.
Click on the [OK] button. Barcode printing will now be possible.
4
Put a check mark in the checkbox for [Barcode] and make detailed settings in
regards to printing using barcodes. When you are finished with making all settings,
click on the [OK] button.
■ Print on first page only
Prints a barcode on the first page of the document.
■ Print on all pages
Prints a barcode on all pages of the documents.
■ Print Barcode ID
To print a barcode ID, put a check mark in this checkbox.
■ Position
Selects the position to print a barcode.
Printing position: Lower Right, Upper Right, Lower Left and Upper Left
■ Orientation
Selects the orientation to print a barcode.
Printing orientation: Vertical and Horizontal
■ Tandem print
* If you connect 2 copiers together you will be able to split the load of large volume
jobs between the two units Select this option when using two copier in tandem for
printing purposes.
To Next Page
Loading...
