What to do if Kyocera All in One Printer cannot use sub address relay broadcast communication?
This problem arises when there isn't enough free space available in the memory. To resolve this, free up some space in memory and then send, or simply make some free space in memory.
Why is there no print output after reception on my Kyocera All in One Printer?
This can occur if memory forwarding is activated. Check the forwarding destination.
Why can't I use sub address bulletin board communication on my Kyocera All in One Printer?
This can happen for a few reasons: * The other party’s fax machine may not have the same sort of sub address bulletin board communication function. If the other party’s fax machine does not have the same sort of sub address bulletin board communication function, it cannot receive faxes via a sub address bulletin board. Check with the recipient. * The entered sub address or sub address password may not be correct. If your entry is correct, check with the recipient.
Why can't my Kyocera KM-5050 use polling reception?
This issue arises if polling transmission is not being used correctly on the sending machine. Check with the recipient to ensure they are using polling transmission correctly.
What to do if Kyocera KM-5050 All in One Printer is restricted by Job Accounting?
Fax transmission is prohibited by Job Accounting. No further operation is possible. Press [End]. The job is canceled. Check the setting for Job Accounting.
What to do if Kyocera KM-5050 cannot output from a FAX Box?
If the box password has been set, enter the correct box password.
Why can't I use the remote switching function on my Kyocera All in One Printer?
This can happen for a couple of reasons: * A pulse line might be in use. Some phones may transmit tone signals using buttons. Refer to the operation manual of your phone set. * The remote switching number might not be correct. Check the registration. (Default: 55)
General| electrical requirements | 120V, 60Hz, 11.5A |
|---|---|
| max monthly volume | 200, 000 Pages Per Month |
| warm-up time | Within 30 Seconds |
| first copy out | 3.5 Seconds |
| pages per minute | 50 Letter, 26 Legal, 26 Ledger |
| system memory | Standard 512MB RAM, upgradeable to 1GB |
| hard disk drive | Standard 80GB HDD |
| resolution | 600 x 600 DPI |
| standard paper sources | Dual 500 Sheet Drawers, 200 Sheet MPT |
| drawer paper size | 5.5" x 8.5" - 11" x 17" |
| paper weight | 13-28 lb Bond via Paper Drawers, 13 lb Bond -110 lb Index via MPT |
| paper size | 5.5" x 8.5" – 11" x 17" |
| paper weight | 17 – 20 lb Bond |
| capacity | 100 Sheet DSDP / 50 Letter Size Originals Per Minute |
| dimensions | 22.4”W x 20.7”D x 5.9”H |
| weight | 29 lbs |
| stack capacity | Main Tray (A): 3, 000 Sheets; Sub Tray (B): 200 Sheets, Sub Tray (C): 50 Sheets |
| dimensions | 26.9"W x 22.2"D x 42.8"H |
| weight | 121 lbs |
| number of trays | 7 |
| dimensions | 20.1"W x 15.7"D x 18.5"H |
| weight | 22 lbs |
| weight | 6.6 lbs |
| dimensions | 25.9"W x 17.9”D x 10.5"H |
| weight | 53 lbs |
| dimensions | 22.0"W x 20.7"D x 36.0"H |
| weight | 55 lbs |
| dimensions | 12.2”W x 16.1”D x 6.3”H |
| weight | 19.8 lbs |
| dimensions | 23.0”W x 23.6”D x 12.4”H |
| weight | 50.7 lbs |
| dimensions | 23.0”W x 23.2”D x 12.4”H |
| weight | 57.3 lbs |
Weight and Dimensions| dimensions | 23.6"W x 25.4"D x 29.3"H |
|---|---|
| weight | 188 lbs |
Identifies key external parts of the machine and their functions.
Details the screens and options within the FAX send interface.
Explains the step-by-step process for sending faxes automatically.
Provides methods to cancel ongoing or scheduled FAX transmissions.
Guides on how to add new contacts or groups to the address book.
Explains how to assign destinations to one-touch keys.
Outlines destination types and criteria for forwarding received faxes.
Explains remote configuration of memory forwarding via COMMAND CENTER.
Specifies settings for receiving and forwarding faxes.
Guides on adding new destinations for fax forwarding.
Explains the purpose and use of FAX Boxes for storing received faxes.
Guides on accessing and viewing the job log screen.
Guides on how to view detailed information for each job log entry.
Guides on setting up automatic switching between FAX and TEL.
Configures settings to restrict outgoing transmissions.
Sets up lists to reject incoming faxes.
Guides on registering FAX numbers that are allowed to transmit.
Describes encryption key settings for secure fax communication.
Guides on accessing the send screen for initiating i-FAX transmissions.
Initiates the FAX transmission process after settings are configured.
Guides on how to manually check for and receive incoming i-FAXes.
To Next Page
