Status / Job Cancel
7-15
7
Checking the Remaining Amount of Toner and Paper
Check the remaining amount of toner, paper, and staples on the touch panel.
Use the procedure below to check the remaining amounts.
1 Press the Status/Job Cancel key.
2 Press [Paper/Supplies].Check the remaining
amount of toner and the status of a waste toner box
in Toner Information, and the remaining amount of
paper in each paper source in Paper.
The items you can check are described below.
Remaining amount of toner
You can check the remaining amount of each color toner as one of 11 levels from 100 to 0%.
Status of waste toner box
You can check the status of waste toner box.
Paper
You can check the size, orientation, type, and remaining amount of paper in each paper source.The remaining
amount of paper is shown by 11 levels from 100 to 0%, however, the paper in the multi purpose tray is shown
by 2 levels as 100% and 0%.
Others
You can check the status of staples.
NOTE: If the optional built-in finisher or document finisher are installed, the Others section provides whether
or not staples are available.
To Next Page
Loading...
