Basic Operation
3-16
Interrupt Copy
This function allows you to pause the current jobs in progress when you need to make copies immediately.
When interruption copy ends, the machine resumes the paused print jobs.
NOTE: You can change the delay until interrupt copying is cancelled. Change the delay as required. For more
information, refer to Interrupt Clear Timer on page 8-50.
1 Press the Interrupt key.
Ready for interrupt copy. is displayed.
The current print job is temporarily interrupted.
2 Place the originals onto the machine for interrupt
copy, and configure the copy settings.
3 Press the Start key to start interrupt copying.
4 When interrupt copying ends, press the Interrupt
key.
The machine resumes the paused print jobs.
To Next Page
Loading...
