6-2
Using Various Functions > Functions Available on the Machine
Functions Available on the Machine
About Functions Available on the Machine
This machine provides the various functions available.
How to Select Functions
To configure the settings for functions, select the function key. By selecting [Functions], other selectable functions will
be shown as a list.
Copy
For details on each function, see the table below.
Function key Description
Reference
page
Paper Selection Select the cassette or multi-purpose tray that contains the required paper size. page 6-10
Zoom Adjust the zoom to reduce or enlarge the image. page 6-23
Density Adjust density. page 6-16
Duplex Produces two-sided copies. You can also create single-sided copies from two-sided
originals.
page 6-27
Combine Combines 2 or 4 original sheets into 1 printed page. page 6-25
Color Selection Select the color mode setting. page 6-18
Functions Description
Reference
page
Quiet Mode Lower print and scan speed for quiet processing. page 6-30
Collate/Offset Offsets the output by page or set. page 6-12
Original Size Specify the original size to be scanned. page 6-9
Original Orientation Select the orientation of the original document top edge to scan correct direction. page 6-11
Mixed Size Originals Scans all sheets in the document processor, even if they are of different sizes. page 6-12
Paper Output Specify the output tray. page 6-15
Staple Staples printed documents. page 6-13
Original Image Select original image type for best results. page 6-16
EcoPrint EcoPrint saves toner when printing. page 6-17
Functions
Original Size
A4
Close
10:10
Original Orientation
Top Edge on Top
On
Off
Quiet Mode
Collate
1/5
Add/Edit
Shortcut
Ready to copy. (Full Color)
Ready to copy. (Full Color)
Copy Copies
Paper
Selection
Zoom Density
Duplex Combine Color
Selection
1-sided>>1-sided
A4 100% Normal 0
Full ColorOff
Functions
10:10
Favorites
To Next Page
Loading...
