Kyocera TASKalfa 307ci - Connecting USB Cable; Connecting the Power Cable

2-8
Installing and Setting up the Machine > Connecting Cables
Connecting USB Cable
1
Connect the cable to the machine.
1 Connect the USB cable to the USB interface connector (option) located on the left side of
the body.
2 Connect the other end of the cable to the PC.
2
Power on the machine.
Connecting the Power Cable
1
Connect the cable to the machine.
Connect one end of the supplied power cable to the machine and the other end to a power
outlet.
IMPORTANT
If the power is on, turn the power switch off.
Power Off (page 2-9)
IMPORTANT
Only use the power cable that comes with the machine.
NOTE
When connecting the power cord to this machine, the touch panel may be displayed
momentarily.
B1