Kyocera TASKalfa 307ci - Staple

6-13
Using Various Functions > Functions
Staple
Staples the finished documents. The staple position can be selected.
Offset Each
Page
Printed copies are collated and output as individual pages
separately.
Offset Each
Set
Printed copies are collated and output as individual set separately.
NOTE
The paper sizes supported in Offset are Legal, Oficio II, Letter, Folio, A4, 16K and 216×340mm.
NOTE
This function requires the optional Sheet Finisher.
For details on paper sizes and numbers of sheets that can be stapled, refer to the following:
Inner Finisher (page 11-24)
Item Value Description
Staple Off
1 staple Select the staple position. For details on original orientation
and staple position, refer to the following:
Original Orientation and Staple Position (page 6-14)
2 staple
Others 1 staple (Top Left)
1 staple (Top Right)
2 staples (Left)
2 staples (Top)
2 staples (Right)
Original
Orientation
Top Edge on Top, Top Edge on Left Select the orientation of the original document top edge to
scan correct direction. Select [Original Orientation] to choose
orientation of the originals, either [Top Edge on Top] or [Top
Edge on Left]. Then select [OK].
Item Image Description
Copy
Print from
Box
Print from
USB