8-20
Setup and Registration (System Menu) > System Menu
Measurement
[System Menu/Counter] key > [Common Settings] > [Measurement]
Low Toner Alert Level
[System Menu/Counter] key > [Common Settings] > [Low Toner Alert Level]
Keyboard Layout
[System Menu/Counter] key > [Common Settings] > [Keyboard Layout]
USB Keyboard Type
[System Menu/Counter] key > [Common Settings] > [USB Keyboard Type]
Offset Documents by Job
[System Menu/Counter] key > [Common Settings] > [Offset Documents by Job]
Item Description
Measurement Select inch or metric for the unit for paper dimensions.
Value: mm, inch
Item Description
Low Toner Alert Set the amount of remaining toner to notify the administrator when to order a toner when the
toner is running low.
This notification is used for event report, Status Monitor, SNMP Trap.
Value: Off, On
If [On] is selected, set the amount of remaining toner to alert. The setting range is 5 to 100% (in
1% increments).
Item Description
Keyboard Layout Change the layout of the touch panel keyboard used to enter characters.
Value: QWERTY, QWERTZ, AZERTY
Item Description
USB Keyboard Type Select the type of USB keyboard that you want to use.
Value: US-English, US-English with Euro, French, German
Item Description
Offset Documents by Job Select whether to offset documents by Job.
Value: Off, On
This function is displayed when an optional Inner Finisher is installed.
To Next Page
Loading...
