8-38
Setup and Registration (System Menu) > System Menu
Security Level
[System Menu/Counter] key > [System/Network] > [Security Level]
Restart
[System Menu/Counter] key > [System/Network] > [Restart]
RAM Disk Setting
[System Menu/Counter] key > [System/Network] > [RAM Disk Setting]
Optional Memory
[System Menu/Counter] key > [System/Network] > [Optional Memory]
Item Description
Security Level Specify the security level.
Value
Low: This mode is used during maintenance. Do not use normally.
High: This is the security setting we recommend. Use this setting normally.
Very High: In addition to [High] setting, this setting disables the machine settings to be
changed from external command.
Item Description
Restart Restart the CPU without turning the power switch off. Use this to deal with any unstable
operation by the machine. (Same as the computer restart.)
This function will not be displayed when the optional SSD is installed.
Item Description
RAM Disk Setting A RAM disk can be created and its size can be set.
Creating a RAM disk makes it possible to print from a Job Box.
Value
RAM Disk Setting: Off, On
RAM Disk Size: The setting range varies depending on the amount of memory installed
and the option memory usage setting.
After changing the setting, restart the network or turn the machine OFF and then ON.
Item Description
Optional Memory When optional memory is installed, select the memory allocation scheme based on the
application in which you are using the equipment.
Value: Printer Priority, Normal, Copy Priority
After changing the setting, restart the network or turn the machine OFF and then ON.
To Next Page
Loading...
