Kyocera TASKalfa 3500i

Default Setting (System Menu)
9-20
BackgrndDens.(Send/Store)
Select the default background density for sending and storing in a document box. The available default settings
are shown below.
Use the procedure below to select the default BackgrndDens.(Send/Store).
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of
BackgrndDens.(Send/Store).
3 Select the default BackgrndDens.(Send/Store).
4 Press [OK].
Prevent Bleed-thru (Copy)
Set the default Prevent Bleed-thru (Copy).
Use the procedure below to select the default Prevent Bleed-thru (Copy).
1 Press the System Menu key.
2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Prevent Bleed-thru
(Copy).
3 Set the default Prevent Bleed-thru (Copy).
4 Press [OK].
Prevent Bleed(Send/Store)
Set the default Prevent Bleed(Send/Store).
Item Description
Off Do not adjust background density.
Auto Set to auto adjustment.
Manual (Darker 5) Set to (Darker 5) in manual adjustment.
Item Description
Off Do not reduce show-through.
On Reduce show-through.
Item Description
Off Do not reduce show-through.
On Reduce show-through.