Kyocera TASKalfa 3500i - Page 360

Default Setting (System Menu)
9-66
Background Density Adj.
Adjust the density used when the background of documents is automatically adjusted.
Use the procedure below to set the Background Density Adj..
Copy (Auto)
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3 Press [Change] of Copy (Auto).
4 Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5 Press [OK].
Send/Box (Auto)
1 Press the System Menu key.
2 Press [ ], [Adjustment/Maintenance] and then [Next] of Background Density Adj..
3 Press [Change] of Send/Box (Auto).
4 Press [-3] - [+3] (Lighter-Darker) to adjust background density.
5 Press [OK].