Management
10-7
10
10
Enter the login password and press [OK].
11
Press [Confirm Password].
12 Enter the same login password to confirm and
press [OK].
13
Press [OK].
14
Press [Change] of Access Level.
15
Select the user access privilege and press [OK].
16
Press [Change] of Account Name.
17
Select the account and press [OK].
NOTE: Select [Name] and [ID] from the Sort pull-down
menu to sort the account list.
Press [Search(Name)] or [Search(ID)] to search by
account name or account ID.
18
Press [Next] of Local Authorization.
19
Press [Change] of Print Restriction.
20
Select [Reject Usage] or [Off] and press [OK].
21
Repeat steps 19 and 20 to set Copy Restriction,
Send Restriction, Fax TX Restriction, Storing Restr.
in Box, and Storing Restr. in Memory.
22
Press [Close].
23
Press [Save] to add a new user on the local user
list.
NOTE: If simple login is enabled, a confirmation
screen appears when new registration is finished
asking if you will configure simple login settings. To
configure simple login settings, press [Yes]. For the
procedure for configuring simple login settings, refer to
Simple Login Settings on page 10-17. If you select
[No], you will return to the user list screen.
To Next Page
Loading...
