Preparation before Use
2-40
1 Press the System Menu key.
2 Press [Common Settings], [Next] of Original /
Paper Settings, [Next] of Cassette Setting.
3 Cassette Setting, select one of [Cassette 1] to
[Cassette 5] and press [Next].
Then press [Change] of Paper Size.
NOTE: [Cassette 3] to [Cassette 5] are shown when
the optional paper feeder is installed.
4 For automatic detection of the paper size, press
[Auto] and select [Metric] or [Inch] as the unit.
To select the paper size, press [Standard Sizes 1]
or [Standard Sizes 2] and select the paper size.
5 Press [OK]. The previous screen reappears.
6 Press [Change] of Media Type and select the
media type. Then press [OK].
NOTE: If the output paper curls, or curling causes
paper-over in the Inner Tray too quickly, change the
cassette paper type to custom 8. (refer to page 9-6)
To Next Page
Loading...
