To Next Page
J
John Hunter MDSep 16, 2025
What to do if Kyocera All in One Printer says 'Check the cover'?
- RRobert EstradaSep 16, 2025
If your Kyocera All in One Printer displays the message 'Check the cover,' close the cover indicated on the touch panel.
What to do if Kyocera All in One Printer says 'Check the cover'?
If your Kyocera All in One Printer displays the message 'Check the cover,' close the cover indicated on the touch panel.
How to remove moire patterns from copies on Kyocera TASKalfa 400ci All in One Printer?
If copies from your Kyocera All in One Printer have a moire pattern, and the original is a printed photograph, set the image quality to [Print Photo].
Why are images skewed when printing from my Kyocera All in One Printer?
Skewed images from your Kyocera All in One Printer may be caused by: * Incorrectly placed originals on the platen. Align them with the original size indicator plates. * Incorrectly placed originals in the optional document processor. Align the original width guides securely before placing the originals. * Incorrectly loaded paper. Check the position of the paper width guides.
Why does my Kyocera All in One Printer keep jamming?
If paper often jams in your Kyocera All in One Printer, make sure the paper is loaded correctly. If it is, remove the paper, turn it over, and reload it. Also, replace the paper if it's curled, folded, or wrinkled. Finally, remove any jammed paper or loose scraps from the machine.
Why are my Kyocera All in One Printer's printouts dirty?
If your Kyocera All in One Printer is printing dirty outputs, clean the platen or document processor. If that doesn't work, brush the transfer roller clean, carry out a Drum Refresh, or perform Laser Scanner Cleaning. Also, you can disable the Printed Document Guard Kit.
How to fix light printouts on Kyocera All in One Printer?
If your Kyocera All in One Printer prints are too light, try these solutions: * If in Auto Density mode, adjust the density level. * If in Manual Density mode, use [Image Quality] to set the correct density. * Shake the toner container from side to side. * Replace the toner container if prompted. * Replace the paper if it's damp. * Perform Drum Refresh or Laser Scanner Cleaning. * Disable EcoPrint mode.
Why are documents printed improperly from my Kyocera TASKalfa 400ci All in One Printer?
If documents are printed improperly from your Kyocera All in One Printer, check that the printer driver and application software settings are set properly on your PC.
Why are printouts from my Kyocera TASKalfa 400ci All in One Printer fuzzy?
If printouts from your Kyocera All in One Printer are fuzzy, and the machine is being used in very humid conditions, carry out Drum Refresh.
Why do white or color streaks appear on prints from Kyocera All in One Printer?
If white or color streaks appear on prints from your Kyocera All in One Printer, the inside of the machine may be dirty. Carry out Laser Scanner Cleaning.
How to improve print clarity on Kyocera TASKalfa 400ci?
To improve print clarity on your Kyocera All in One Printer, select an appropriate image quality setting for the original document.
General| Brand | Kyocera |
|---|---|
| Model | TASKalfa 400ci |
| Category | All in One Printer |
| Language | English |
