10-22
Troubleshooting > Troubleshooting
Part of the image is
periodically faint or shows
white lines.
― Open and then close the right cover. ―
― Run [Drum Refresh 1]. page 10-42
The previous image
remains and lightly
printed.
― Make sure the paper type setting is
correct for the paper being used.
page 8-15
Print on the back of the
sheet is visible on the
front.
― Set [Prevent Bleed-through] to
[On].
page 6-32
page 8-18
Symptom Checkpoints Corrective Actions
Reference
Page
To Next Page
Loading...
