10-43
Troubleshooting > Adjustment/Maintenance
Drum Refresh 2
Remove white dots from the printout.
1
Load paper.
Load Ledger or A3 size paper into the Multipurpose tray.
2
Display the screen.
[System Menu/Counter] key > [Adjustment/Maintenance] > "Drum Refresh 2" [Next]
3
Perform the drum refresh.
Select [Start]. "Drum Refresh 2" begins.
Drum Refresh 2 cannot be performed while printing. Execute Drum Refresh 2 after the printing is done.
When you run [Drum Refresh 2], the machine sometimes makes a vibrating sound for
about 80 seconds until drum refreshing is completed. The toner soiling on the ejected paper
is normal and does not indicate a fault.
To Next Page
Loading...
