EasyManua.ls Logo

Kyocera TASKalfa 4012i - Page 591

Kyocera TASKalfa 4012i
616 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11-20
Appendix > Specifications
Output Tray
Capacity
Inner tray 250 sheets (80 g/m
2
)
Job separator
tray
50 sheets (80 g/m
2
)
Image Write System Semiconductor laser and electrophotography
Memory
2.0 GB
Large Capacity Storage
3212i: SSD 8 GB/Hard Disk 320 GB
4012i: SSD 8 GB/Hard Disk 320 GB
Interface Standard USB Interface Connector: 1 (Hi-Speed USB)
Network interface: 1 (10 BASE-T/100 BASE-TX/1000 BASE-T (IPv6, IPv4,
IPSec), 802.3az supported)
USB Port: 4 (Hi-Speed USB)
Wireless LAN: 1
Option eKUIO: 2
*2
Fax: 2
*3
Operating
Environment
Temperature 10 to 32.5°C/50 to 90.5°F
Humidity 10 to 80 %
Altitude 3,500 m/11,483 ft maximum
Brightness 1,500 lux maximum
Dimension (W × D × H) 23.39 " × 27.41" × 26.89"
594 × 696 × 683 mm
Weight Approx. 130.1 lb/Approx. 59 kg (without toner container)
Space Required (W × D)
(Using multipurpose tray)
34.38" × 27.41"
873 × 696 mm
Power Source 120 V Specification Model: 120 V 60 Hz 11.6 A
230 V Specification Model: 220 to 240 V 50/60 Hz 6.3 A
The power consumption of the
product in networked standby (If
all network ports are connected.)
The information is available at the website below.
http://www.kyoceradocumentsolutions.eu/index/environment/
green_products/low_power_consumption.html
Options
Optional Equipment (page 11-2)
*1 Up to upper limit height line in the cassette.
*2 When two optional interface are installed, a fax line can not be installed.
*3 When IB-50 or IB-51 is installed, only one fax line can be installed.
Item Description

Table of Contents

Other manuals for Kyocera TASKalfa 4012i

Related product manuals