2LK/2LN/2LM/2LC-2
1-3-8
Mode
setting
U250 Checking/clearing the maintenance cycle -
U251 Checking/clearing the maintenance coun-
ter
-
U252 Setting the destination -
U253 Switching between double and single
counts
DBL(A3/Ledger)
U260 Selecting the timing for copy counting Eject
U265 Setting OEM purchaser code -
U271 Setting the page count 2/3
U276 Setting the copy count mode Mode0
U278 Setting the delivery date -
U284 Setting 2 color copy mode Off
U285 Setting service status page On
U323 Setting abnormal temperature and humid-
ity warning
On
U325 Setting the paper interval Off/1
U326 Setting the black line cleaning indication On/8
U327 Setting the cassette heater control Off
U332 Setting the size conversion factor
Rate 1.0
Mode 0
Level 1 1.0
Level 2 2.5
U340 Setting the applied mode 0/0
U341 Specific paper feed location setting for
printing function
-
U343 Switching between duplex/simplex copy
mode
Off
U345 Setting the value for maintenance due indi-
cation
0
Image
processing
U402 Adjusting margins of image printing 4.5/2.2/2.2/2.2
U403 Adjusting margins for scanning an original
on the contact glass
2.0/2.0/2.0/2.0
U404 Adjusting margins for scanning an original
from the DP
2.0/2.0/2.0/2.0/2.0/2.0/2.0/2.0
U407 Adjusting the leading edge registration for
memory image printing
0
U410 Adjusting the halftone automatically Table1
Section
Item
No.
Content of maintenance item
Initial setting
30ppm 35ppm 45ppm 55ppm
To Next Page
Loading...
