2LK/2LN/2LM/2LC-2
1-3-48
U053 Setting: [Motor1 3/4]
1. Select the item to be adjusted.
Setting: [Motor2 3/4]
1. Select the item to be adjusted.
*: 45 ppm/55 ppm model only.
Setting: [Motor3 3/4]
1. Select the item to be adjusted.
Item No. Description
Display Description
Setting
range
Initial
setting
Drum(K) Drum motor K (DRM-K) at 3/4 times of
line speed
-5000 to 5000 0
Display Description
Setting
range
Initial
setting
Dev(K)
Developer motor K (DEVM-K) at 3/4
times of line speed
-5000 to 5000 0
Dev(CMY) Developer motor MCY (DEVM-MCY) at
3/4 times of line speed
-5000 to 5000 0
Trans Belt Transfer motor (TRM) at 3/4 times of
line speed
-5000 to 5000 0
Regist* Registration motor (RM) at 3/4 times of
line speed
-5000 to 5000 0
Belt Clean
Transfer cleaning motor (TRCM) at 3/4
times of line speed
-5000 to 5000 0
Display Description
Setting
range
Initial setting
30ppm 35ppm 45ppm 55ppm
SB Eject motor (EM) at 3/4
times of line speed
-5000 to 5000 0 -60 -44 -44
Fixing Fuser motor (FUM) at 3/4
times of line speed
-5000 to 5000 0 0 0 0
Bridge1 Bridge conveying motor 1
(BRCM1) at 3/4 times of
line speed
-5000 to 5000 0 0 0 0
Bridge2 Bridge conveying motor 2
(BRCM2) at 3/4 times of
line speed
-5000 to 5000 0 0 0 0
Feed Paper feed motor (PFM)
at 3/4 times of line speed
-5000 to 5000 0 0 0 0
Job Sepa-
rator
JS eject motor (JSEM) at
3/4 times of line speed
-5000 to 5000 0 0 0 0
Mid Roller* Middle motor (MM) at 3/4
times of line speed
-5000 to 5000 - - 0 0
To Next Page
Loading...
