Kyocera TASKalfa 5550ci - Page 71

2LK/2LN/2LM/2LC-2
1-2-47
32. Remove the four screws securing the
MK-2 cover; attach the MK-2 mount to
the MK-2, and secure using the four
screws.
Figure 1-2-62
33. Fit the MK-2 to the document table
using two M4 x 20 tap-tight S screws.
Figure 1-2-63
MK-2 mount
Screws
Screws
Screws
Screws
MK-2
MK-2
MK-2
Document table
M4 x 20
tap-tight S
screw
M4 x 20
tap-tight S
screw