Kyocera TASKalfa 5550ci - Page 78

2LK/2LN/2LM/2LC-2
1-2-54
4. Insert the KMAS interface PWB to three
spacers B.
Figure 1-2-69
5. Remove YC7 and YC23 on the main
PWB and connector of the controller fan
mor. Remove the relay wire.
Figure 1-2-70
Spacer B
KMAS interface PWB
Spacer B
Spacer B
Controller
fan motor
YC23
YC7
Relay wire
Main PWB