8-6
Fax Settings > Default fax settings
Function Defaults
Display Status/Log
Show Power Off Message
FAX
Settings related to the fax function can be configured.
TX/RX Common
Item Description
FAX TX Resolution Select the default scanning resolution.
Value: 400×400dpi Ultra Fine, 200×400dpi Super Fine, 200×200dpi Fine, 200×100dpi Normal
Continuous Scan (FAX) Set the continuous scan defaults.
Value: Off, On
Item Description
Display FAX Log Set the display method of the Status/Log.
Value: Show All, Hide All
Item Description
Show Power Off Message Set the mode whether display a confirmation message in power supply off.
Value: Off, On
Item Description
Encryption Key Registration This is used to register an encryption key for encrypted communication.
Encryption (page 5-21)
FAX Remote Diagnosis If a problem arises with this machine and you contact our service representative, this feature
enables our Service Center computer to access the machine over the phone and check the
machine’s status or look for problems.
NOTE: To use Remote Diagnostics, you must first sign an agreement with our service
representative and register a Predetermined ID on the machine. For more information,
contact your Service Representative or Authorized Service Center.
Value: On, Off
Remote Diagnostics ID If you have turned on Remote Diagnostics, enter the predetermined ID.
Value: 0000 - 9999
To Next Page
Loading...
