Kyocera Triumph-Adler P-4026iw - Quick Setup Wizard (Fax Setup)

2-7
Before Using the Fax Machine > Quick Setup Wizard (Fax Setup)
Quick Setup Wizard (Fax Setup)
In quick setup mode, a wizard is used to configure the following settings. Be sure to complete the settings before using
the fax system.
Fax setup items
Step Setting item Description
Reference
Page
1.Dialing/RX Mode Dialing Mode
*
* Inch version only.
Select the dialing mode according to the line type. 8-7
Reception Mode Select the reception mode. 8-8
Auto (DRD)
**
** DRD reception mode is available for some countries.
Select the reception pattern. 8-8
2.Local Fax Info. Local FAX Name Register the local fax name printed on the fax on the receiving
system.
8-7
Local FAX Number Enter the local fax number to be printed on the fax on the
receiving system.
8-7
Local FAX ID Enter the local fax ID. The local fax ID can limit other parties
with which you can communicate. Enter the 4-digit local FAX
ID number.
8-7
TTI Select whether or not to print the local fax information on the
fax on the receiving system.
8-7
3.Sound Speaker Volume Set the volume when selecting [On Hook].
Speaker Volume: Volume of the built-in speaker when the line
is connected by selecting [On Hook].
8-5
Monitor Volume Set the monitor volume.
Monitor Volume: Volume of the built-in speaker when the line is
connected without selecting [On Hook] such as in memory
transmission.
8-5
Job Finish Buzzer Emit a sound when a job is normally completed. 8-5
4.Rings Normal
***
*** This setting does not appear in some regions.
Set number of times to let phone ring before answering a call. 8-8
Answering Machine*** Set number of times to let phone ring before taking over from
the answering machine.
8-8
FAX/TEL Switch*** Set number of times to let phone ring before switching the FAX
and the phone.
8-8
5.Redial Retry Times Set the number of redials. 8-7
NOTE
The settings can be changed in the system menu.
Default fax settings (page 8-2)