L-Acoustics K2 User Manual

Specications
Specications
K2 specications
Description 3-way full-range active WST enclosure , quad-amplied by LA4X / LA8
Usable bandwidth (-10 dB) 35 Hz - 20 kHz ([K2 70])
Maximum SPL
1
147 dB ([K2 70])
Nominal directivity horizontal: 110°/70° symmetric or 90° asymmetric (35°/55° or 55°/35°)
vertical: dependent upon the number of elements and the line source curvature
Transducers LF: 2 × 12" cone drivers
MF: 4 × 6.5" cone drivers
HF: 2 × 3" diaphragm compression drivers
Acoustical load LF: bass-reex, L-Vents
MF: bass-reex
HF: DOSC waveguides
Nominal impedance LF: 2 × 8 Ω
MF: 8 Ω
HF: 16 Ω
Connectors IN: 1 × 8-point PA-COM
LINK: 1 × 8-point PA-COM
Rigging and handling captive 4-point rigging system
inter-enclosure angles: 0.25°, 1°, 2°, 3°, 4°, 5°, 7.5° or 10°
Weight (net) 56 kg / 123.2 lb
Cabinet rst grade Baltic birch plywood
Front steel grill with anti-corrosion coating
acoustically neutral 3D fabric
Rigging components high grade steel with anti-corrosion coating
Finish dark grey brown Pantone 426C
IP IP45
1
Peak level measured at 1 m under free eld conditions using pink noise with crest factor 4 (preset specied in brackets).
K2/SB28 user manual (EN) version 7.0 27

L-Acoustics K2 Specifications

General

Frequency Response	35 Hz - 20 kHz
Max SPL	147 dB
Transducers	2 x 12" LF, 4 x 6.5" MF, 2 x 3" HF
Nominal Impedance	8 ohms
Amplification	LA8 / LA12X
Weight	56 kg
Type	3-way active WST line source
Components	12" LF, 6.5" MF, 3" HF
Connectors	2 x 4-point speakON