DVR Settings
Selecting & Configuring Record Triggers
Flashback3 & Flashback HD User’s Guide
Page 98 L3 Mobile-Vision 6.23.2017
8 P
ress to select the AUX1 Trigger field.
9 P
ress to toggle the field value to ON or OFF.
10 P
ress four times to save your changes and exit this option.
Turning the Aux 2 Trigger On
This section describes how to turn the Auxiliary 2 record trigger on. When this
feature is on, the DVR will automatically begin recording whenever your Auxiliary 2
device (such as a motion detector) is activated.
I
f desired, you can program the DVR to automatically stop an Aux 2 triggered
recording X number of minutes after the triggering activity ceases. For example, if
your Aux 2 device is a motion detector, the “triggering activity” would be motion. If
the AUX 2 Delay field is set to 5, then after five motionless minutes, the DVR will
automatically stop recording.
*
1 M
ake sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
*
Assuming that the value of the AUX 2 Trigger and AUX 2 Stop fields is ON.
To Next Page
Loading...