DVR Settings
Changing the Audio Settings
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision 6.23.2017 Page 69
8 P
ress to toggle the field value to ON or OFF.
9 P
ress four times to save your changes and exit this option.
Turning the VLP2 Audio On/Off
This section describes how to turn your VLP2 port’s audio setting on or off. If this
setting is on, audio from the VLP2 or VLX wireless microphone connected to input
port VLP 2 will be recorded. If this setting is off, audio from the VLP2 or VLX
wireless microphone connected to input port VLP 2 will not be recorded.
1 Make sure the door to your DVR is open and Auto mode is off. (If necessary, press
the button until the light turns off.)
2 P
ress . The Main Menu displays.
3 P
ress the or
button until Recording is highlighted.
To Next Page
Loading...
