L3 Mobile-Vision Flashback HD - Page 71

DVR Settings
Changing the Record Settings
Flashback3 & Flashback HD User’s Guide
L3 Mobile-Vision  6.23.2017 Page 63
9 Press to select the Pre-Record field.
10 U
se the button to select the desired length for your pre-recordings (in seconds):
0, 10 (default), 20, 30, 40, 50, or 60. Once the desired number displays, proceed to
the next step.
11 I
f you wish to change your post-record setting as well, proceed to the next step.
– OR –
If you do not wish to change your post-record setting, skip to step 16.
12 P
ress .
13 U
se the button to advance to the Post-Record field.
14 P
ress to select the Post-Record field.