To Next Page
M
Matthew AndersenJul 30, 2025
How to fix a faint LCD display on my La Crosse Technology Clock?
- BBrian SmithJul 30, 2025
If the LCD display on your La Crosse Technology Clock is faint, try replacing the batteries.
How to fix a faint LCD display on my La Crosse Technology Clock?
If the LCD display on your La Crosse Technology Clock is faint, try replacing the batteries.
What to do if my La Crosse Technology WS-8001U isn't receiving the WWVB signal?
If your La Crosse Technology Clock isn't receiving the WWVB signal, here are a few things to try: * Face the front of the clock towards Ft. Collins, Colorado, as this may improve reception. * Allow the clock to attempt signal reception overnight. * Ensure the clock is at least 6 feet away from electrical devices like TVs, computers, and other radio-controlled clocks. * Try removing the batteries for five minutes, then reinsert them and leave the unit alone overnight without pressing any buttons.
Why is the hour incorrect on my La Crosse Technology WS-8001U Clock (but the minute and date are correct)?
If the hour is incorrect on your La Crosse Technology Clock, but the minute and date are correct, ensure that you have selected the correct time zone and daylight saving time settings.
What to do if the moon phase is incorrect on my La Crosse Technology WS-8001U?
If the moon phase is incorrect on your La Crosse Technology Clock, check the calendar data and the batteries.
Why does “OFL” appear on the LCD of my La Crosse Technology WS-8001U Clock?
If "OFL" appears on the LCD of your La Crosse Technology Clock, it means the surrounding temperature is outside the measuring range. Move the clock to an area with a warmer or cooler temperature.
General| Brand | La Crosse Technology |
|---|---|
| Model | WS-8001U |
| Category | Clock |
| Language | English |
Instructions for installing batteries in the Moon Phase Clock unit.
Details the four function buttons located on the backside of the clock.
Guide to setting the correct time zone for the clock.
Instructions for setting Daylight Saving Time (DST) to on or off.
Procedure to select the display language for weekdays.
Steps to manually set the hour and minute for the clock.
Guide for setting the year, month, date, and weekday.
How to choose between 12-hour and 24-hour time display formats.
Procedure for selecting the temperature unit (°F or °C).
How to cycle through different display modes for time and temperature.
Detailed instructions for setting and managing the alarm function.
Instructions on how to activate the snooze feature when the alarm sounds.
How to temporarily stop the alarm until the next day.
Information about the moon phase display and its corresponding dates.
Details on how the indoor temperature is displayed and updated.
Guide to using the foldout table stands for placement.
Instructions for securely mounting the clock on a wall.
