EasyManuals Logo

La Crosse Technology WS-8001U User Manual

La Crosse Technology WS-8001U
13 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
5
PROGRAM MODE
To enter the Program Mode hold down the “SET” button for 2 seconds, until “-5EST”
flashes in the Date LCD. The Program Mode is laid out in a manner that allows you to
program each function separately, or you can follow the instructions entirely to program
the Moon Phase Clock. Complete programming is usually done for the initial set-up, and
will require you to skip step 1 of programming sections III through VIII. Press the
SNOOZE” button at any time to exit the Program Mode, or wait approximately 15
seconds for the Moon Phase Clock to automatically return to normal operation.
I) FUNCTION BUTTONS
There are 4 function buttons located on the backside of the Moon Phase Clock. The
function buttons are labeled: SET, +, ALARM, and SNOOZE.
II) TIME ZONE SETTING
1) Hold down the “SET” button for 2 seconds, the default setting “-5EST” will
flash in the Date LCD.
2) Press the “+” button to select the appropriate time zone. There are 13 time
zones to choose from:
-5EST Eastern Time (default setting)
-6CST Central Time
-7MST Mountain Time
-8PST Pacific Time
-9ALA Alaskan Time
-10HAW Hawaiian Time
-11
-12
GMT Greenwich Mean Time
-1
-2
-3
-4ATL Atlantic Time
3) Press the “SET” button to confirm the time zone setting, and to advance to
DST (Daylight saving time) setting.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the La Crosse Technology WS-8001U and is the answer not in the manual?

La Crosse Technology WS-8001U Specifications

General IconGeneral
BrandLa Crosse Technology
ModelWS-8001U
CategoryClock
LanguageEnglish

Related product manuals