INSTRUCTIONMANUALFORTHEINSTALLER
Theelectricheatingsystemoftheapplianceisalreadysetbythemanufacturertoworkatintheboiler,
correspondingto1barboilerpressureandonethermicdifferential(
∆
T)of.Thesedataareviewedonthe
display(33)ofthecontrolpanel.Itisalsopossibletochecktheboilerpressureonthepressuregauge(4)on
theappliance.
MoveDIP1ofthecontrolboxtotheONposition;“”(codefortemperatureprogramming)willappear
onthedisplayfollowedby“”.
Pressbuttons or tovarythissetting(settingrangepossiblebetween.).
Pressthebutton
SET
toconrmthesetting.
“”willappearonthedisplay(
∆
Tprogrammingcode=thermicdifferential),followedby“”.
Pressbuttons or tovarythesetting(settingrangefrom).
Pressthebutton
SET
(39)toconrmthesettingand“”willappearonthedisplay(probecalibration
setting,alreadysetbythemanufacturer).
Pressthebutton
SET
,againandmoveDIP1totheOFFposition.
Closetheelectriccontrolboxandchecktheoperatingfunctionofthenewparametersthathavebeen
set.
Thisfunctionisusedexclusivelybythemanufacturerofthecontrolboard.
Pressthecup-warmerfunctionbutton andcheckitsoperatingstatusthroughtheswitchingonofthe
LEDonthecontrol-panel(23).Toswitchitoffpressthesamebutton.
•
•
•
•
•
•
•
•