La Spaziale COMPACT - Page 77

INSTRUCTIONMANUALFORTHEINSTALLER

Itispossibletodeactivatetheelectricheatingoftheheatingelementsbypressingthebutton 
(32)ontheprogrammingpanel.Oncedeactivated,therelevantsymbol(34)onthecontrolpanelwillswitch
offtoindicatethisstate.Toreactivatetheelectricheating,pressthebutton
(32)again:thesymbol
(34)willswitchon.
Itcanbeusefultodeactivatetheelectricheatingsysteminappliancesequippedwithgassystem.
Theproceduresnecessarytochangetheoperatingtemperaturearelistedinthefollowingparagraph.

Holddownthebutton
(40)ontheprogrammingpanelfor;thesymbolonthecontrolpanel
forthesettemperaturewillremainlitwhiletheothersymbolswillswitchoff.
Usethebuttons (37)or (38)tochangethesetting.
Pressthebutton (40)toquittheprogrammingfunction.



Switchofftheappliance.
Pressandholddownthebutton (40)andswitchontheappliance.
The“”symbolwilllightuponthecontrolpanelandthetemperaturewillautomaticallybesetto
Itispossibletocheckthestatusoftheheatingelementswiththerelevantsymbol(34):iflit,itmeans
thattheSETTemperaturehasbeenreached;ifashing,itindicatestheheatingphase.
Usingthebuttons (37)or (38)youcanchangethisdatum.Eachtimethatthebuttonsarepressed,
probecalibrationischangedby
Ifthesymbolafter“”isashing,thismeansthatachangeofhasbeenmade;ifitislit,thechangeis.



Pressthecupwarmeroperatingbutton(24)andcheckitsoperatingstatusthroughthelightingupofthe
LED(23)onthecontrolpanel.Toswitchitoff,pressthesamebutton.
•
•
•


•
•
•
•
