Appendix D: Freeze Dryer Accessories
Product Service 816-333-8811 or 1-800-522-7658
56
Lyph-Lock
®
Flasks
*Valves on the freeze dry system, drying chambers and manifolds offered in this catalog fit adapters of
both ½" and ¾" sizes. Size information is provided for selecting adapters for older Labconco models
and other freeze dryers.
Adapters
Add the adapters for connecting the Lyph-Lock Flasks to
the valve ports on your drying chamber or manifold.
90° Bend
Adapter
Description
7568000
Connects 19/38 STj Flask Top to ½"
valve*
7568200
Connects 19/38 STj Flask Top to
3/4"valve*
7568400
Connects 24/40 STj Flask Top to ½"
valve*
7568600
Connects 24/40 STj Flask Top to 3/4"
valve*
Flask Size
Complete
Flask
19/38 STj
Complete
Flask
24/40 STj
Flask Top
19/38 STj
Flask Top
24/40 STj
Lyph-Lock
Seal
Flask
Bottom
Dimensions/
Flask Bottom
H x ID
25 ml 7550000 7550000 7552000 7556000 7559000 7557000 37mm x 34mm
50 ml 7550200 7554200 7552000 7556000 7559000 7557200 67mm x 34mm
100 ml 7550400 7554400 7552200 7556200 7559200 7557400 50mm x 59.2mm
250 ml 7550600 7554600 7552200 7556200 7559200 7557600 110mm x 59.2mm
500 ml 7550800 7554800 7552400 7556400 7559400 7557800 103mm x 90.2mm
750 ml 7550900 7554900 7552400 7556400 7559400 7557900 145mm x 90.2mm
1000 ml 7551000 7555000 7552400 7556400 7559400 7558000 187mm x 90.2mm
Lyph-Lock Flasks simplify your
Lyophilization procedures because they
have only three pieces per flask – a high
strength borosilicate glass top and
bottom with a silicone rubber ring seal.
The unique wide-mouth design helps
you load samples easily and lyophilize
efficiently.
How to select Lyph-Lock Flasks for
your Freeze Dry System
Select Lyph-Lock Flasks fast- based on
your sample sizes. Flasks should be
filled no more than one-third of their
volume so that maximum surface area is
achieved and efficient lyophilization is
assured. A complete Lyph-Lock Flask
includes a glass top and bottom and a
rubber ring seal. Tops, bottoms and
seals are available separately as
replacement components. Adapters are
required to attach flasks to freeze dry
valve
orts.
To Next Page
Loading...
Need help?
General
