EasyManuals Logo
Home>Labconco>Laboratory Equipment>Protector Premier 10040 Series

Labconco Protector Premier 10040 Series User Manual

Labconco Protector Premier 10040 Series
70 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #34 background imageLoading...
Page #34 background image
Chapter 6: Maintaining Your Protector Premier
Product Service 1-800-522-7658
30
Original instructions
Les déflecteurs de hotte devraient être contrôlés pour leur blocage arrière
afin d’assurer que la hotte maintient un flux d’air correct.
All weekly activities.
Toutes les activités hebdomadaires.
Annually
Annuellement
Replace the lamps, if needed.
Remplacer les lampes, si nécessaire.
Have the fume hood recertified by a qualified certification technician. See
Certifying the Protector Fume Hood in Chapter 3.
Recertifier la hotte aspirante par un technicien agréé en certification.Voir
au Chapitre 3 « Certifier la Hotte Aspirante Protecteur ».
All monthly activities.
Toutes les activités mensuelles.
Biannually
The sash assembly should be checked to ensure proper operation and to
make sure there are no signs of abnormal wear on the sash pulleys, cables
and clamps.
Routine Service Operations
Front Panel Removal:
1. Simply lift the front panel up and then away from the hood to provide access
to the top.
Changing the Lamp:
1. Turn light switch to “OFF”.
2. Remove the front panel as noted earlier.
3. Reach over the front header of the hood and remove knock out plugs at both
ends of fixture. Lift fixture up.
4. Remove the lamp by pushing it out of the spring-loaded lamp socket and
swinging it out of the other lamp socket.
5. Install the new lamp by reversing the removal procedure.
S
A

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Labconco Protector Premier 10040 Series and is the answer not in the manual?

Labconco Protector Premier 10040 Series Specifications

General IconGeneral
BrandLabconco
ModelProtector Premier 10040 Series
CategoryLaboratory Equipment
LanguageEnglish

Related product manuals